Roy Sutherland has sent us details of a wide range of new detail and correction sets in 1:24, 1:32 and 1:48.

Barracuda Studios is proud and happy to announce 11 new products for immediate release. 

Over the past few years, we have gotten a good number of requests to replace the rubber tires for the classic 1/24 Airfix Spitfire, Me109E and Hurricane kits.  These hew wheels sets fill that gap with highly detailed and accurate new wheels. The rubber tires are not popular with modelers, as they can dry out and split. They also don't take paint well and they are a little sticky, and tend to attract and hold on to dust and grit.

We have also released some further upgrades for the RevellBf-109G-6, in t6he form of corrected upper cowls with better detail and proper spacing between the gun troughs. The Revell Spitfire Mk IX kit is nice, but it is lacking radiator intake and exhaust ramps. This set corrects that design oversight. We also have a new undercowl with a proper rendition of the Aerovee carburettor intake.

Finally, a pair of vacform sliding hoods for the EduardFw-190 kits, both new and old tool. 

These new products are up on the website now and ready to be ordered. 

Happy Modelling! 

BR24449 1/24 Spitfire Mk. I - IX Five Slot Mainwheels

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed 5-slot wheel hubs. Designed to replace the rubber tire/plastic wheel hub assembly found in the Airfix and Trumpeter Spitfire Mk. I and V kits.  A fast and easy upgrade. Patterns designed by Gerry Mos

BR24450 1/24 Spitfire Mk. I - IX Covered Mainwheels

This set consists of a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed covered 5-slot wheel hubs. The covered hubs were used to keep mud and dirt out of the wheels hubs.Designed to replace the rubber tire/plastic wheel hub assembly found in the Airfix and Trumpeter Spitfire Mk. I and V kits.  A fast and easy upgrade. Patterns designed by Gerry Mos

BR24425 1/24 Hawker Hurricane 4 Slot Mainwheels

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed wheel hubs with separate uplock lugs. Designed to replace the rubber tire/plastic wheel hub assembly in the available kits.  A fast and easy upgrade for the Airfix and Trumpeter Hurricane kits. Patterns designed by Gerry Mos

BR24435 1/24 Bf 109E/F Mainwheels with Ribbed Tires

This set contains a pair of accurate resin mainwheels featuring super detailed spoked hubs, subtly ribbed tires and readable logo and data as fitted to the Bf 109E and F series aircraft. Replace the problematic rubber tires found in both the Airfix Me 109E. Patterns designed by Gerry Mos

BR32157 1/32 BF 109G-6 Upper Gun Cowling (Standard)

This set consists of one detailed, accurate upper cowling. This set improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell’s Bf 109G-6 kit part. For non-Erla built Bf-109G-6s. A one piece, easy to install correction for the Revell kit. Pattern by Gunnar Jansson.

BR32158 1/32 BF 109G-6 Upper Gun Cowling (Erla)

This set consists of one detailed, accurate upper cowling specific to the Erla built 109G-5 and G-6 aircraft. The gun troughs are different on these Erla built machines. Erla upper cowlings have a rectangular panel line around them. This set also improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell’s Bf 109G-6 kit part. A one piece, easy to install correction for the Revell kit. Pattern by Gunnar Jansson.  

BR32461 1/32 Spitfire Mk IX Late (Aerovee) Carb Intake

Contains a new resin lower engine cowling w accurate, detailed, late style Aerovee

carburettor intake to improve the simplified, inaccurate Revell Spitfire Mk IX parts. A  quick and easy one-piece replacement. For the Revell Spit IX kit. Mastered by Roy Sutherland.

BR32340 1/32 Spitfire Mk. IX Wing Correction (Revell)

This set contains a pair of new resin wing sections featuring accurate intake & exhaust ramps to replace the flat wing sections in the kit. Also included are new detailed radiator fairings and radiator faces to replace the less detailed kit parts. Clear, illustrated step by step instructions walk you through the installation. A real improvement for the Revell kit. Master patterns by Roy Sutherland.

BR32448 1/32 Bf 109F/G Separate Control Surfaces

The set consists of new resin ailerons, elevators and standard rudder for the Revell kit. Why did we make them? The kit parts have nice fabric rib tape detail, but it is overstated and the trailing edges are quite thick when assembled. It takes a good bit of careful sanding and shaping to thin the edges and make the fabric detail properly subtle. We have done it for you. For Revell's Bf 109G series. May fit other kits. Master patterns by Roy Sutherland.

BR48458 1/48 Fw 190A,F,D Standard Sliding Hood

This set contains one accurately shaped, crystal clear, distortion free, vacform sliding standard hood to replace the kit part in all Eduard Fw 190 kits. Will fit most other kits, too. Why do you need them? Eduard's first generation 1/48 Fw-190s had both sliding hoods molded without enough bulge over the pilot's head. The second generation FW-190 kits are superb, but they did not fix this problem. Compare to drawings and photos and you will see it. It's subtle, but it's there. These vac canopies are mostly straight lines, and therefore, easy to trim out. A simple and very visible upgrade. 

BR48459 1/48 Fw 190A,F,D Blown (Late war) Sliding Hood

This set contains one accurately shaped, crystal clear, vacform sliding blown hood to replace the kit part in all Eduard Fw 190 kits. Will fit most other kits, too. Why do you need them? Eduard's first generation 1/48 Fw-190s had both sliding hoods molded without enough bulge over the pilot's head. The second generation FW-190 kits are superb, but they did not fix this problem. Compare to drawings and photos and you will see it. It's subtle, but it's there. These vac canopies are mostly straight lines, and therefore, easy to trim out. A simple and very visible upgrade.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE

YOUR REACTION?

SUPPORTER ADVERTISEMENT

You may also like