Test print out of V6. 

I’ve made the vent open to make the gun purge team happy, you will have options to pose opened or closed in the final design. 

The panel lines have been reduced in width.

Also present, the later gun nozzle. If you have any drawings to share on the early fairing, I’m struggling finding them.

Thanks to a gentleman that will self recognise, I had the a$$ kick to further mod the lower nose shape. 

To cope with Tamiya fuselage, which is belly fat, I adapted the Tamiya cross section to the other  accurate cross sections. It resulted in a curved line at the canon fairing mating zone.

I cheated a little more on the whole length by adding fat all along to recover that straight line at the fairing.

On the renders:

V1 first with a straight line, but not adapting to Tamiya parts. 

V4 with the curved fairing line, is basically V1 with Tamiya profile at the mating.

V6 back with a straight line but also adapting to Tamiya. All in all, the less accurate, but the best looking.

Also it’s going to be time to adapt the windscreen.

Cheers 

M

LFD 32 - F4-E Phantom II Nose – 1:32

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE.