_GOTOBOTTOM
World War II: Germany
Aircraft of Germany in WWII.
Hosted by Rowan Baylis
1/72 Eduard Fw 190 F-8
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Sunday, October 06, 2019 - 04:00 AM UTC
My ambitions for the last few weeks have been to finish a bunch of kits already started, this is another one that fits into this description even if I haven't blogged it until now! It was started almost two years ago according to the EXIF-data in the photos, so here we go!


Another one of Eduard's attractive boxes...


...bits and pieces glued together...


...it comes with a very elaborate wing spar/wheel well design...


...a bit of primer...


...and parts-on-sticks! This is about where I picked up a few days ago!


After a quick paint session...


...the wings came on...


...and being an Eduard kit one can get away with this! The best method for getting a good wing root joint but fit has to be good in order for this to work.


Finally, some references! There is a full chapter on Sicilian 190:s in tropical camo. Thanks !



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Sunday, October 06, 2019 - 08:38 AM UTC
I'll definitely be keeping an eye on this build Magnus, as it's a kit I've had on my wishlist for sometime now

Not a bad idea attaching the top wing root first as I've seen various people use that method as it tends to avoid gaps appearing later on in the build
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Monday, October 07, 2019 - 04:28 AM UTC
Russell! Treat yourself to one of these, it is a fantastic kit!


Wings and armoured cowling ring in place, waiting for glue joints to settle then it's time for primer!



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Monday, October 07, 2019 - 09:36 PM UTC
on my wish list Magnus

But I did promise myself that I wouldn't purchase any more kits until I reduce the stash by half
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Monday, October 07, 2019 - 10:21 PM UTC
Russell! You KNOW you need one! I can throughly recommend the Royal Class edition, comes with a beer glass and a piece of metal from a real FW. And four kits of course



Magnus
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Thursday, October 10, 2019 - 06:01 PM UTC

Coming along nicely ! Primer on, canopy masked.



Magnus
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Friday, October 11, 2019 - 06:24 PM UTC
I should really have been working yesterday but I was waiting for a few CAD-files from a customer so I got a couple of bonus hours at the workbench before lunch. Sometimes life is extra good !


The Mediterranean option in the kit is "White 1", in my references there is a photo of "White 2" so I'll go for that one in order to get something a tiny bit more unique (not that it is that important but anyway...). Most of the other markings were painted over so is is a very simple change of identity!


I have often been a bit lazy when it comes to primer, this time I took it seriously and repainted where I had been doing some extra sanding so that I got a base that was almost solidly white. With the sand paint being in the yellow family of paint hues, this was a good thing, I could paint very thinly without having to cover up any bare plastic patches that require a more solid paint cover.

Got to get those fuselage crosses on (they will get partly overpainted) before the real fun starts: green spots !



Magnus
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Saturday, October 12, 2019 - 08:30 AM UTC
I've posted those masking sequences before, sorry but they don't evolve over time !













Didn't get to the green dots but maybe tomorrow!



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Saturday, October 12, 2019 - 09:19 AM UTC

Quoted Text

Russell! You KNOW you need one! I can throughly recommend the Royal Class edition, comes with a beer glass and a piece of metal from a real FW. And four kits of course



Magnus



Ooo, I know I need one, Magnus

But... Must... Resist... For now!

So many mask & other supplies I need for now that I must prioritise

Now, back on topic: this is looking absolutely amazing. So the yellow sand is providing a base for more colours?
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Thursday, October 17, 2019 - 08:24 AM UTC
It took a few evenings but now the green spots are finally in place! I didn't use MRP for these, I went for my old love Gunze.




While I was at it, I painted the lower surfaces blue and painted the crosses on.



Magnus
BlackWidow
_VISITCOMMUNITY
European Union
Joined: August 09, 2009
KitMaker: 1,732 posts
AeroScale: 1,336 posts
Posted: Thursday, October 17, 2019 - 07:09 PM UTC
Magnus, what paint did you use for RLM 79? To me it looks too yellowish. Sometimes it's called "Sand Yellow" and sometime "Sand Brown". But maybe it's just my Monitor at work ....
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Monday, October 21, 2019 - 08:02 AM UTC
Torsten! You're right, it is without doubt a bit on the yellow side! Paint is MRP-68 RLM 79 "Sandgelb (variant 1)". "Variant 1" makes me wonder what "Variant 2" is, probably a browner version. Another reason for the rather yellow look is my choice of a white primer, with a grey primer it would have looked a bit less conspicious.


All the major painting finished! After Torsten pointing out the yellow tone I've gone over it once again with RLM 79 and it got a bit darker, I trust my weathering to do the rest !

Minnie the Mouse decals are on, the only decals I will use on this one. Swastika was overpainted and I would suspect this goes for the service markings and stencilling as well.



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Monday, October 21, 2019 - 09:33 PM UTC
Magnus, you are the master!

I can only hope to try to match the quality of your builds once I get cracking on a Hurricane for the Sopwith-Hawker-Bae campaign soon
RLlockie
_VISITCOMMUNITY
United Kingdom
Joined: September 06, 2013
KitMaker: 1,112 posts
AeroScale: 21 posts
Posted: Monday, October 21, 2019 - 11:37 PM UTC
Looks good but weren’t the wheel wells left in unpainted aluminium by the time the F8 was in production? Sure I read that in a few things by Michael Ullmann. Dropping the 02 for internal surfaces (and some underside panels) was tried out first on 190s.
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Tuesday, October 22, 2019 - 08:31 AM UTC
Russell! Thanks, I'll try to live up to your expectations ! What Hurricane will you be doing? If you go for 1/72, I can honestly recommend the Arma Hobby kit!

Robert! To be honest: I don't really know and you could very well be right regarding the wheel well colours. I followed Eduard's painting instructions and they say RLM 02. According to my references, the photos of this aircraft were taken during the spring of 1944 so it would then be an early-build F-8, I have the impression that the emergency measures with labour- and materials-saving procedures were begun later than so but as I say above, I don't know for sure! Right or wrong, they will stay grey !


After a wash to pick out the surface detail, I'll continue with the lower surfaces tomorrow!



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Tuesday, October 22, 2019 - 02:17 PM UTC

Quoted Text

Russell! Thanks, I'll try to live up to your expectations ! What Hurricane will you be doing? If you go for 1/72, I can honestly recommend the Arma Hobby kit!



For me there will always only be one scale and that is 1/72-unless of course it's 1/24 but that's an entirely different ball game

After seeing your build of Arma's metal wing Hurricane I'm sorely tempted to acquire and build it. I'll probably add it to the collection at some point though.

However for the Sopwith-Hawker campaign it'll be fabric wing effort by Airfix that's been residing in my stash for a while now, all the while working its wily ways on me to take it out of the box, open those plastic bags and in-hale deeply the smell of fresh styrene Along with a dozen or so other red boxes
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Wednesday, October 23, 2019 - 06:34 AM UTC
I should have remembered - Russell the Airfix guy ! The fabric wing Hurricane is on my shopping list as well!

This shop is closing temporarily, the action will be going on over here for the next few weeks. The FW had to move back into the box again, life ain't fair!



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Wednesday, October 23, 2019 - 08:15 AM UTC
yep, that's me, the Airfix guy with a 'salty' heart!

From one Airfix guy to another, it's a good compliment

Sad to see this one move back into the shelf, but will be following along on the Yak!
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Wednesday, October 23, 2019 - 05:50 PM UTC
Russell! There is a strong motivation to get back to and finish the FW this side of the New Year: if I assume that I'll manage to finish both the Yaks (I see no reason why I shouldn't since they aren't exactly record complicated ), the FW would take 2019's grand total up to ten finished models. That would then be a major personal best for me and an even and easy-to-remember number !



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Thursday, October 24, 2019 - 08:18 AM UTC

Quoted Text

Russell! There is a strong motivation to get back to and finish the FW this side of the New Year: if I assume that I'll manage to finish both the Yaks (I see no reason why I shouldn't since they aren't exactly record complicated ), the FW would take 2019's grand total up to ten finished models. That would then be a major personal best for me and an even and easy-to-remember number !



Magnus



Wow! 10! That's an inspirational amount of completed builds Magnus! Congratulations!

I'll manage to scrape together just 2 finishes this year: The KGV started over 5 years ago and the Trans Am around 4 years ago
BigZimmo
_VISITCOMMUNITY
Baden-Württemberg, Germany
Joined: December 06, 2016
KitMaker: 132 posts
AeroScale: 117 posts
Posted: Thursday, October 31, 2019 - 11:45 PM UTC
Hi Magnus!!!

I'm sure that it will be another cracker from your workbench!! Looking forward to the result!!
And it's funny, 'cause today I've finished my own F-8 from I./SG4 in 1/32 scale. It is the "White 11".

Continue to succeed, mate

Cheers
Stefan
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Thursday, November 07, 2019 - 07:15 PM UTC
Russell! As I've said elsewhere, ship models are a whole different thing than cranking out ten fighter models in smaller scales!

Stefan! Don't be shy, that FW of your's deserves a link! I'll revisit later for inspiration!



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Saturday, November 09, 2019 - 09:58 PM UTC

Quoted Text

Russell! As I've said elsewhere, ship models are a whole different thing than cranking out ten fighter models in smaller scales!




True that, Magnus!

Next year could be a salt free year. The KGV will be finished for Christmas which means wing things will be the order of the day. I've already signed up for the Hawker campaign with the Hurricane, the big 3 campaign is next which I'm hoping to finish one of each, and then the Schwalbe campaign to follow. So there's 5 already and if I can I'll squeeze in a Martlet for the Rotary campaign!
magnusf
_VISITCOMMUNITY
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Thursday, March 19, 2020 - 09:21 AM UTC
Friends! I've got twelve days to finish this one since the biplanes of WWII-campaign starts in April. Most of the "difficult" stuff is already done so there should be a chance...

While finishing the Hurricane I've managed to spend some spare modelling time on this one as well.


Lower surfaces got a wash to pick out the detail and tone down the (still) rather vivid blue.


I've also worked the upper surfaces with buff- and dust-coloured Oil Brushers to get a bit of a bleached effect. It is hard to tell from the photos but it really made a difference!


And after a flat coat with some extra added flat base to the mix it really looks deserty ! (Wüstich in German?)



Magnus
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Thursday, March 19, 2020 - 09:56 PM UTC
Only 12 days till the bi-planes of WWII, but 12 months to complete...

Meanwhile this is looking great

Best health to everyone!
 _GOTOTOP