AIRFIX [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
172
Airfix Valiant extra parts
Airfix Vickers Valiant tanker / reconnaissance parts and decals
  • move

by: Sean Langley [ PIGSTY ]

The Valiant was the first of Britain’s V-Bombers. It was ordered as an interim measure while the RAF waited for the Vulcan and the Victor. Because of this, it was soon supplanted in the bombing role and became available for other tasks. The best known was as the RAF’s first aerial tanker, which enabled the V-Force to reach properly strategic range. Another very important role was photo-reconnaissance, in which Valiants explored the routes that the other bombers would take and helped to prepare new, much better maps of northern Europe. Valiant tankers kept going for nearly ten years until fatigue problems in low-level flight led to their retirement; by then, the Polaris programme had enabled the Victor to give up bombing and take over as the tanker for the Vulcan.

Airfix released the much-anticipated Valiant last year (reviewed HERE) and it walked off the shelves. The options inside were effectively all bombers - although three were nominally B(K).Mk.1s, the only options in the kit were to build them in bomber configuration with the bomb doors open or closed. The other variants were missing. However, as Vickers had, Airfix had engineered the kit to allow them to be built, and this new kit supplies the necessary parts. From it you can build a Valiant B(PR)K.Mk.1 (the second, more versatile PR version) or a B(K).Mk.1. Visually, if you can get hold of suitable decals, the PR version could probably pass for a more basic B(PR).Mk.1 as well.

“Detail-up” sets aren’t new to the market, but this is an innovative approach for Airfix. It’s both a good thing and a bad thing. It means that, if you want to build the PR or tanker variants, you have to pay more than if you want to build the bomber. On the other hand, since no Valiant kit contains the extra parts, perhaps it has allowed the price of the main kit to be kept down a little. One peculiar thing is that the new set doesn’t actually contain everything that you need - this is because the main kit already includes the glazing for the camera ports, sitting waiting to be used.

So, let’s take a look at the parts.

You get one simple grey sprue with 11 parts. One of them is the underside of the PR variant with all ten camera ports fitted into the bomb doors. To build it you simply tuck the glazing into it and pop it under the fuselage in place of the standard closed doors.

The others are all for the tanker version. The largest is a replacement bomb-bay roof, with plumbing moulded in. Most of the other parts make up the hose-drum unit and its cradle, with two going to make up a pumping unit and the last acting as a cover for it whose purpose isn’t really clear. Building it is relatively straightforward, effectively following the build sequence for the bomber version with the doors open.

Detail is pretty good, although not top of the range. The moulded-in pipework is inevitably only half-round, although this shouldn’t matter very much once everything else is installed. The hose wrapped round the drum isn’t really right, as it can’t form a true spiral, but again it will give a fair impression. The part that stands out as not quite good enough is the drogue on the end of the hose. In real life this is a metal-and-fabric basket that hangs untidily in a flat oval when not out in the airflow. The kit offers instead a perfectly round shape with rudimentary detail on the outside and none at all within. It will look OK installed, but isn’t really much of an advance over what the Matchbox Victor offered nearly thirty years ago.

The instructions are well laid out and do a cunning trick. While you can’t actually replace an entire page from the main kit’s booklet, you can just skip from one to the other and replace Step 16 (or 17) with a different Step 16 (or 17), then return to the standard instructions. The bulk of the instructions are for the decals, in full colour.

There are two decal options. For the tanker, you get an anti-flash white aircraft (XD812) of 214 Squadron at RAF Marham in 1960; for the PR aircraft, you get WZ399 in high-speed silver with red wingtips and tail surfaces, flying with 543 Squadron at RAF Wyton in 1957. These are really only individual markings and you have to rely heavily on the main kit’s decals for national markings and stencilling. The one exception is the fin flash for WZ399, which has a white border, unlike the one in the main kit for the silver prototype and the camouflaged version. The blue on this replacement flash looks a trifle too light to my tired old eyes, but the rest seem fine.

All in all this is a very welcome set of parts. I’ve not seen many Valiants built yet but I suspect a large proportion will be white bombers. Although I can’t prove it, I suspect this is one reason why Airfix elected not to make all three variants available in the original boxing. This set enables you to build one of the more unsung - but possibly more important - variants instead. It also allows you to cover all the roles that the V-bombers took on, either in the form of three Valiants or by adding, say, the PR Valiant to a bomber Vulcan and a tanker Victor. Moulding is of the same standard as the main kit, so nothing will look out of place. Token sprue-fondling indicates that fit should be OK too – as good as the main kit, though not just a drop-fit.

My only real quibble is value for money. This set is about a quarter of the price of the main kit and doesn't give you a quarter of the parts count. And if you want the PR version, you get worse value than if you want the tanker. The solution is to arrange to share a set with someone who’ll be happy to have the parts you don’t want. And remember, if you want to build both, you will of course need to buy two Valiant kits as well!

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: Useful set of different variants; good, solid moulding and decals
Lows: Detail a little lacking; not necessarily brilliant value
Verdict: A handy set to have if you want to explore the Valiant's full repertoire. Worth getting.
Percentage Rating
90%
  Scale: 1:72
  Mfg. ID: A65000
  Suggested Retail: £9.99
  PUBLISHED: Aug 30, 2012
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.50%
  MAKER/PUBLISHER: 79.26%

About Sean Langley (pigsty)
FROM: NO REGIONAL SELECTED, UNITED KINGDOM

Copyright ©2021 text by Sean Langley [ PIGSTY ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Sorry, everyone, I missed out a crucial detail on the PR side. The only extra part you get is the adapted bomb doors. There are no camera parts at all. You'll want to either scratch-build up to ten of the things, or blank the backs of the ports. I don't think this detracts from the overall rating, as everything is on the underside and we rarely display models upside-down, but you might want to note it.
AUG 30, 2012 - 10:08 PM
Isn't that because the clear part for the ports is included in the base kit?
AUG 31, 2012 - 01:31 AM
I said "no camera pArts"! - as in, nothing to make the cameras with. You do get the ports (as noted, in the base kit) but that's where the detail stops; there's nothing behind them.
AUG 31, 2012 - 02:58 AM
Ah, yes. Likely it's because Airfix decided that little would be seen. Still, a few styrene boxes and tubes and a little scratchbuilding would solve that. I'd have to suppose that the bomb doors would still open for access to the cameras? A servicing diorama would be interesting.
AUG 31, 2012 - 06:51 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT