EDUARD [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
148
Fokker Eindecker Dual Combo
Fokker E.I/II Die Ersten Kanonen Dual Combo kit
  • move

by: Jean-Luc Formery [ TEDMAMERE ]

History
The Fokker Eindecker was a German World War I monoplane single-seat fighter aircraft designed by Dutch engineer Anthony Fokker. Developed in April 1915, the Eindecker ("Monoplane") was the first purpose-built German fighter aircraft and the first aircraft to be fitted with synchronizer gear, enabling the pilot to fire a machine gun through the arc of the propeller without striking the blades. The Eindecker granted the German Air Service, known as the Luftstreitkräfte, a degree of air superiority from July 1915 until early 1916. This period was known as the " Fokker Scourge, " during which Allied aviators regarded their poorly armed aircraft as " Fokker Fodder ".

The main difference between the E.I and E.II was the engine, the former having the seven-cylinder 60 kW (80 hp) Oberursel U.0 rotary engine which was essentially a direct copy of the French-made Gnôme Lambda, while the latter had the nine-cylinder 75 kW (100 hp) Oberursel U.I, a direct copy of the Gnome Monosoupape rotary. Production of the types depended on engine availability and the two variants were built in parallel. The definitive version of the Eindecker was the Fokker E.III , which used a slightly narrower-chord (1.80 meter, or 71 inch) dimension on their wings than the earlier versions had. Many E.IIs were either completed as E.IIIs or upgraded to E.III standard when returned for repair.

The two most famous Eindecker pilots were Oswald Boelcke and Max Immelmann , both of Feldflieger Abteilung 62, who scored their first kills in E.Is in August 1915. Boelcke scored the most Eindecker victories: 19 out of his final tally of 40, his last coming on 27 June 1916. Immelmann had the second-highest Eindecker score, having achieved all his 15 victories in the type before being killed when his E.III broke up in June 1916. Both Boelcke and Immelmann received Germany's highest military decoration, the "Blue Max", while flying the Eindecker, after passing the then-required eight victory total for each aviator.

(Source: Wikipedia)

The Kit
Eduard's new 1:48 scale Fokker E.I/II Dual Combo kit comes in a standard top opening cadboard box. It's the second time this kit is released, the first edition being the Fokker E.II/III ProfiPack (kit n° 8156). The big difference is that this time you get two kits instead of a single one. Of course the plastic of the kit has nothing in common with the old short run kit Eduard did 15 years ago. This is a moulding made with the latest design and injection technology.

The graphic layout, like for other Limited Edition kits by the same manufacturer, has been designed on purpose and the box artwork shows two Eindeckers flying over a big cross on the background. It is to note, for German language purists, that the title should be "Die ersten Kanonen" instead of "Die erste Kannonen". The number of N letters is right, but they are not all at the right place.

Once the box lid has been removed, one will find with the following content:
- Two complete plastic kits of the Fokker Eindecker (2 X 3 sprues of pale olive green plastic).
- Two very small windscreens made of clear plastic.
- Two photo etched frets (one pre painted) with enough parts for two models.
- One small sheet of masks for two models.
- Two resin figures (Boelcke and Immelmann).
- One small Iron Cross pin.
- Two decals sheets.
- One instruction booklet.

The overall quality of the plastic parts is very good with no sink marks and very little traces of flash. Some parts are really tiny and though the attachment points are small, extreme care will be necessary to remove them from the sprue... and a sharp cutter fitted with a new blade!

The main parts of the model (fuselage, wings, horizontal tailplane and rudder) are nicely done. The two wings are made of one piece each. In fact there are four wings in each kit, so this makes eight in total in this Dual Combo box! The only differences between the wing parts are the cutout for the different cowl rear fairings and the extended cowling enclosing the ammunition container which was present on some machines of each Type (E.I, E.II and E.III). The relief detail of the fuselage and wings (ribs and metal cowlings) is finely rendered.

Where Eduard really concentrated all their efforts is the cockpit interior. This was a good idea as it will be very visible on the completed model. Photo etched parts included, it is composed of over 50 parts and really should look the part once assembled.

The engine, or should I say engines since there are two models, are also very nice. They are composed of a serie of cylinders (7 or 9 depending on the type) made in injected plastic with additional PE parts for the pushrods and the ignition wires. Quite basic in fact but the real ones weren't much more complex. It seems Eduard have designed the parts without giving the possibility to the modeller to leave the engine movable. This is a shame as the original Oberursel U.0 and U.I were rotary engines.

The smaller parts for the exterior are also a mix of plastic and PE parts: engine cowlings, propeller (two types), undercarriage, tyres etc... are made of injected styrene while the lacings and other smaller items are made of photo etched parts. The presence of spoked wheels is a nice touch. Eduard provide a lot of tiny metal parts to do the rigging termination points but no cables are present, so you will have to use your own favorite material for this.

Instructions and markings
The A4 sized instruction booklet is typical of Eduard. It is composed of 12 pages of which 8 are printed in black & white (history, parts layout, color table given for the Gunze range of paints, assembly guide, rigging diagram and figure painting guide) while the other are in color (marking options). It is to note that only four out of the five decorations are present in the booklet. The fifth one must be downloaded on the kit's info page at the Eduard website (direct link here).

These are the five marking options included in this Dual Combo kit:
A - Ltn d R Max Immelmann, FA62, Douai, France, August 1915 (Fokker E. I)
B - Ltn Otto Parschau, Kagohl 1, Ghistelles, Belgium, early 1916 (prob. Fokker E.II)
C - Ernst Freiherr von Althaus, FA23, 1915 (Fokker E. I)
D - Ltn Oswald Boelcke and Ltn d R Max Immelmann, FA62, Douai, France, October 1915 (Fokker E. II)
E - Ltn zur See Gotthard Sachsenberg, MFA, Mariakerke, Belgium, November 1915 (Fokker E. III)

As you can see, while it is noted E.I/II on the kit, the last machine is an E.III so it is possible to do the three most common variants of the aircraft with this box. All are finished in the standard doped linen finish with black crosses over white markings and white rudder. Only the machine of Immelmann carries a distinctive fuselage band.

The two decal sheets are excellent. They have both been printed in black & white by Eduard it seems. White backgrounds are provided for the black crosses so there is no need to paint them using masks if one does not wishes so.

Additional items
What makes the Eduard Limited Editions so special are the goodies which are present in the box. This time two superb resin figures of Max Immelmann and Oswald Boelcke are included which, once painted, will look great next to their respective machines. Two portrait cards accompany both figures with some historical background for each famous pilot. The small Iron Cross pin could be a great addition to a nameplate you put down for the kit (thanks to Stephen Lawson for the tip!)

Conclusion
This is another excellent Limited Edition kit by Eduard. Not only will it allow you to build two detailed replicas of the Fokker Eindecker, but it also represents a great "historical" package for every enthusiast of combat aircraft model kits. With it's monoplan design, maybe it is also a good starting point if you want to reproduce a complex WWI rigging for the first time as there won't be an upper wing in the way each time you want to add a bracing cable. Highly recommended!

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AeroScale.
SUMMARY
Highs: High quality plastic and PE parts - Interesting historical package - Nice resin figures included.
Lows: The typo of the title...
Verdict: Excellent historical package of an important aircraft. Recommended not only to WWI enthusiasts.
Percentage Rating
90%
  Scale: 1:48
  Mfg. ID: 1141
  Suggested Retail: $ 74.95
  Related Link: Fokker Eindecker Dual Combo
  PUBLISHED: Dec 13, 2009
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.63%
  MAKER/PUBLISHER: 88.59%

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Jean-Luc Formery (TedMamere)
FROM: MOSELLE, FRANCE

I'm mainly interested in WW2 aircraft and I build them in 1/48 scale.

Copyright ©2021 text by Jean-Luc Formery [ TEDMAMERE ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Sorry Andrew. Its the general policy that we let the description box at the bottom note the scale. Nicely Done Jean - Luc! Very decent review and I would agree on the rating. Looks like an early aviation über kit! A true combo as it provides everything for two complete kits.
DEC 13, 2009 - 08:47 PM
Having built most of this kit I must say that my example, at least, is not up to Eduard's usual standards. I have three Eindecker III builds in 1/72 and one E-IV, all from Eduard. One of my built EIII builds has won a number of awards in local shows. This is to the point that I love the airplane and waited years for Eduard to release this kit in 1/48. I bought one immediately. Unfortunately, the quality of the casting on my example is very poor. The fuselage halves do not come together, top and bottom, flat. The cross section is more like a very shallow "v" that has to be filled. It's large and deep enough that putty is required. The really bad thing here is that the work that must be done on the top and bottom of the fuselage completely destroys the delicate impressions of the internal framing pressing into the fabric covering. In fact, the top of the fuselage right behind the gas tank cover was so bad I had to cover it with thin styrene sheet. All in all, the fuselage is now ruined in that it never will have the same level of detail and smoothness as it was intended. I had been on the verge of buying the Dual Combo kit but unless I determine that I got a bad example in my box, I will have to think long and hard before buying another 1/48 Eindecker from Eduard. And, that's a shame because this is one of the top models I want in my collection. Rangefinder
DEC 14, 2009 - 05:38 PM
Greetings Scott what you have discovered is the malformation that takes place when sprue molded at right angles is pushed from the mold too soon. The method to fix this must be done before any prep work on the kit is undertaken. After finding the problem areas by dry fiting the fuselage halves, take one of the fuselage halves (the most offensive) using both hands. Your thumbs on the outside surfaces, your finger tips on the inside the piece. Next flex the top and bottom (half)sections to line up the mismated edges. Do not over flex the piece. Dry fit and check as you go. The old DML / Dragon 1:48 Fokker Dr.I and D.VII exhibited this misalignment issues. Especially the post Hong Kong reunification examples. From the mold these edges were supposed to line up. But as mentioned pushing the sprue out too early tends to create this problem. There are other causes but this is the most common.
DEC 15, 2009 - 06:29 AM
Hi Scott, Sorry for the late reply. I will check my sample and do some test fitings. I'll post some pictures tomorrow. If I forget, please remind me... Jean-Luc
DEC 15, 2009 - 06:54 AM
I just checked mine out. It looks like it will join up fine on my example. Scott, I would love to see some pictures of your builds.
DEC 15, 2009 - 07:45 AM
Hi Carl Glad to know your kit is OK. I'll be interested to see what Jean-Luc's is like. Another trick for overcoming this problem, if it does occur, is to insert some rectangular bulkheads to maintain the correct cross-section. You can usually obviate the need for too much filler and so preserve the moulded detail. All the best Rowan
DEC 15, 2009 - 09:10 AM
Stephen, thanks for the tip. I am obviously too far along to try this, or the "bulkhead" idea also suggested. Wish I'd known or thought of this before. If I'd dry fit the halves and inspected it closely, I might have. I'm going to take a look at a friend's kit. He hasn't started it, and see what his looks like. I might get in touch with Eduard on this. Probably a good QC feedback. Someone asked to see some of my builds. You can here at my web site: web.mac.com/eindecker/ Thanks, all. Michael
DEC 17, 2009 - 05:01 PM
Hi Scott, I haven't had the time to test fit the parts on my sample but will do over the weekend... Jean-Luc
DEC 17, 2009 - 07:05 PM
Just bringing this up for Jean - Luc and some inspirational modeling in 1:1 by Herrn Achim Engels.
AUG 02, 2010 - 07:49 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT